DataTrace General Accessories

Part number: 210279-004

Description: Lever-type can punch to create a hole for installation of a Thermowell Datalogger

Part number: 210279-003

Description: Lever-type can punch to create a hole for installation of a receptacle, C-12

Part number: 210279-002

Description: Awl to make pilot hole for C-11 punch

Part number: 200156-001

Description: Spanner wrench with handle for use with the IR Standoffs

Part number: 200161-001

Description: Rubber grommet to provide additional sealing for the Screw Coupling

Part Number: 210278-001

Description: Stainless Steel, two-piece receptacle for metal containers, C-5

Part Number: 210278-005

Description: Delrin, two-piece receptacle for metal containers, C-5D

Part Number: 210278-002

Description: Brass, two-piece receptacle for plastic pouches, C-5.1

Part Number: 210278-004

Description: Brass, two-piece receptacle for plastic pouches, C-5.1M

Part Number: 123460-500

Description: Modified Hex Nut for C-5 Fitting

Part Number: 210044-500

Description: Gasket for C-5 receptacles (pkg of 100), C-16

Part Number: 124859-001

Description: Gasket for C-5.1 receptacles (pkg of 100), C-26

Part number: 124930-001

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Yellow, bag of 25

Part number: 124930-002

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. White, bag of 25

Part number: 124930-003

Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Red, bag of 25

Part number: 122028-001

Description: 0.8 inch inner diameter acrylic PC interface sleeve, for use with dual housing MPRF loggers

Part number: 124601-500

Description: Allows the DataTrace^® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For taper tip ONLY

Part number: 124299-500

Description: Allows the DataTrace^® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For bullet tip ONLY

Part number: 124963-125

• Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Union Fitting

Part number: 124964-125

• Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Tube Fitting

Part number: 124964-006

• Description: MPRF/MPIII Pressure Adapter with 0.24″ (6 mm) Tube Fitting

Part number: 200194-001

• Description: MPRF/MPIII Pressure Adapter with ¾” Tri-Clamp Fitting

Part number: 200195-001

• Description: MPRF/MPIII Pressure Adapter with 1½” Tri-Clamp Fitting

Part number: 200196-500

• Description: MPRF/MPIII Pressure Adapter with 3” Tri-Clamp Fitting

Part number: 200197-500

• Description: MPRF/MPIII Pressure Adapter with 4” Tri-Clamp Fitting

Part Number: 124752-040

Description: Dustfilter to protect RH sensor

Part Number: 124756-002

Description: Solid cap – extended to protect RH sensor during temperature calibration in a bath

Part Number: 200204-002

Description: Clip attached to a magnet. Attaches logger to inside of Application Chamber/Rack for use in Temperature Mapping